Based

on this observation, a sufficient SNR>4 is necessary to measure the real textural behavior of the human brain.12,13 Figure 6. FLASH (fast low angle shot) selleck chemicals images of a normal volunteer for measuring signal-to-noise (SNR) dependence of texture parameters at (A) SNR =1 (1 acquisition) and (B) SNR =18 (324 acquisitions). C to E. Texture parameters (SNR, entropy 5×5, correlation 5×5) … Normalization A texture test object (PSAG) was developed on the basis of polystyrene (PS) and agar solution (AG) to mimic texture properties artificially. PS spheres are available Inhibitors,research,lifescience,medical from the technological process of PS production. Two types of spheres were used for the phantom construction: randomly distributed spheres of diameter 0.2 to 3.15 mm; or mechanically separated spheres of diameter 0.8 to 1.25 mm, 1 .25 to 2 mm, or 2 to 3.15 mm. Polyethylene tubes of diameter 1.5 and 2.8 cm were filled with spheres and by a hot solution of 4% agar (free and doped with DyCl3). One milliliter of 0.1 % NaN3 was added per liter of agar for microbiological stability.14 A second texture test object containing foam at Inhibitors,research,lifescience,medical different. densities in Gd-DTPA solution was used to describe microtexture properties. Phantom tubes containing foams with coarse, middle, and fine density were constructed and filled with a Magnevist® (Schering,

Berlin) solution at. a concentration of 1:4000. Problems with the foam phantoms are air bubbles, Inhibitors,research,lifescience,medical which create susceptibility artifacts in the images, and so a careful preparation of the foam phantoms is necessary. Both types of phantoms were placed next to the head of a volunteer and a position for the imaging slab was chosen such that all vials and part of the volunteer’s brain were contained in the 3D slab. With this setup several

Inhibitors,research,lifescience,medical Inhibitors,research,lifescience,medical 3D data sets with different imaging parameters were acquired to demonstrate the influence of resolution and SNR, as well as the dependence of the texture parameters on different imaging parameters (eg, α,TR,TE). In a pilot study, texture parameters such as mean gradient show the same behavior in phantoms as in white matter for different patients, indicating that a normalization of texture parameters using test objects is possible (Figure 7) However, texture normalization is necessary, but it is not possible to mimic all texture features by phantoms.15 Figure 7. A. Three-dimensional FLASH (fast low angle shot) image of a patient with glioblastoma Ketanserin with texture test objects located beside the head for testing texture normalization. B. Texture parameters such as mean gradient show the same behavior in the phantom … Clinical application The aim of this pilot study was to assess the possibility of quantitative description of texture directivity in trabecular bone with an attempt to quantitative description of trabecular bone structural anisotropy using texture analysis of 3D FLASH MRI. A series of 3D FLASH images, all of 256×256 pixels, with the voxel size of 0.4×0.4×0.